
Reliable filtration starts with verified specifications.
Oil Separator Element B006700770027
Air Compressor Filter Elements replacement element
Air Compressor Filter Elements
B006700770027 Oil Separator Filter is built-in oil-gas separation component specially designed for large oil-injected screw air compressors. Installed inside the oil-gas separation tank of the air…
Orders are confirmed by our team for price, compatibility and delivery.
Verified specifications for confident selection.
Confirm installation requirements against the equipment manual or original documentation.
| Height | 304.8 mm |
|---|---|
| Outer Diameter | 274.6 mm |
| Inner Diameter | 200.2 |
| Filtration Rating | 0.01 ~ 0.03 μm |
| Weight | 7.72 kg |
| Flange Outer Diameter | 355.6 mm |
B006700770027 Oil Separator Filter is built-in oil-gas separation component specially designed for large oil-injected screw air compressors. Installed inside the oil-gas separation tank of the air compressor, it is responsible for deeply intercepting and separating the lubricating oil mist carried in the airflow before the compressed air enters the aftercooler and the gas consumption end, ensuring the cleanliness of downstream compressed air and realizing the recycling of lubricating oil.
Core Product Features
• High-precision deep filtration.
Adopting multi-layer superfine fiberglass composite filter media, it can effectively capture oil-aerosol particles at the level of 0.01 ~ 0.03 μm. The filtration efficiency reaches over 99%, ensuring the oil content in exhaust gas is controlled at ≤ 3 ppm.
• Low pressure differential energy-saving design.
The optimized pleated filter layer structure and high-permeability support net greatly reduce air flow resistance, with an initial pressure differential of only ≤ 0.02 MPa (approx. 0.2 bar), helping cut energy consumption loss during the loaded operation of air compressors.
• High-strength explosion-proof and pressure-resistant structure.
The inner and outer protective screens are made of high-strength galvanized carbon steel perforated plates. Combined with oil-resistant high-temperature end caps and special adhesives, it can withstand a maximum working pressure of 10 bar and scouring by high-temperature oil and gas, preventing the filter element from deforming or collapsing under high pressure differential.
• Static dissipation safety protection.
The flange plate is equipped with conductive gaskets or anti-static pins, which can promptly conduct static charges generated by high-speed friction of oil mist to the oil-gas tank shell, eliminating the risk of static sparks in the oil-gas mixed environment.
Installation Notes
Stop the system and release pressure before removal. Confirm flow direction and sealing surfaces before installation.
Maintenance & Replacement
Replace according to pressure drop or the maintenance schedule. Inspect for leakage and seal damage.
Before Ordering
Confirm medium, flow rate, pressure, temperature, connection and available installation space.
Delivery Options
Shipping or service point pickup. Our team confirms the best arrangement based on destination, weight and lead time.
Confirmed Before Dispatch
After inquiry, we verify specifications, price and supply status before delivery.
Ongoing Support
For specification, installation or quality questions, keep the product and order information available when contacting us.
INQUIRYSend an inquiry for this product
Send your requirements for B006700770027 and our selection team will confirm compatibility, price and lead time.
Selection Resources
Need help confirming B006700770027 or comparing it with another reference? Use these selection resources before ordering.



