Image coming soonB010454350Precision in every layer
Reliable filtration starts with verified specifications.
Reliable filtration starts with verified specifications.
Air-Oil Separator B010454350
Air Compressor Filter Elements replacement element
Air Compressor Filter Elements
Part number B010454350 (also commonly written as 010454350 or 10454350) is the oil-gas separator core for screw air compressor. Enquire about relevant information.Core Functions and Working…
Supply TypeIndependent aftermarket replacement
AvailabilityAvailable
Lead Time2–3 business days
Reference price · tax included
Request quotation
Orders are confirmed by our team for price, compatibility and delivery.
Flexible DeliveryService Point Pickup
Verified specifications for confident selection.
Confirm installation requirements against the equipment manual or original documentation.
| Filtration Precision | 0.3μm |
|---|---|
| Outer Diameter | 300 mm |
| Inner Diameter | 220 mm |
| Flange Outer Diameter | 355 mm |
| Height | 600 mm |
| Initial Pressure Drop | ≤ 0.02 MPa |
Dimensions are indicative, not an engineering drawing.
Part number B010454350 (also commonly written as 010454350 or 10454350) is the oil-gas separator core for screw air compressor. Enquire about relevant information.
Core Functions and Working Principle
This separator element adopts the "coalescence interception" principle:
1. Coarse separation: More than 90% of large oil droplets settle to the bottom of the oil-gas barrel through mechanical collision and gravity when entering the barrel.
2. Fine separation (function of this product): Air containing micron-sized oil mist passes through the special multi-layer composite glass fiber layer of the filter element.
3. Coalescence and recovery: Extremely tiny oil droplets are trapped and merge with each other when passing through the filter screen to form larger oil droplets. These droplets flow to the bottom of the filter element under gravity, are sucked back into the airend for recycling via the oil return pipe of the air compressor, and finally clean high-pressure air with almost no oil content is discharged.
Product Structure and Design Features
• Multi-layer stepped filtration: The internal filter media generally consists of a pre-filter layer, an ultra-fine fiber coalescing layer, a support layer and a separation layer. This multi-layer design not only improves filtration efficiency, but also gives the filter element an extremely high dirt-holding capacity.
• Heavy-duty reinforced metal frame: High-strength, corrosion-resistant perforated mesh or spiral lock-seam frame is adopted, featuring excellent pressure resistance and impact resistance. It can withstand high pressure differentials without deformation or rupture.
• High-temperature resistant special adhesive: Modified polyurethane or epoxy resin adhesive is used for high-strength bonding and curing between the end caps at both ends of the filter element and the central frame, ensuring no debonding or air leakage for long-term service under high-temperature (up to 120°C) and high-pressure conditions.
• Graphite anti-static gasket: Metal conductive pins (or conductive strips) are embedded in the attached sealing gasket. Static electricity is easily generated by the high-speed friction of oil and gas. This design conducts static electricity to the equipment for discharge, effectively preventing internal explosion and combustion inside the oil drum caused by static sparks.
Installation Notes
Earthing Safety: The metal shell of the barrel is equipped with an anti-static earthing conductive gasket (a metal conductive pin is usually fitted at the flange graphite gasket). Do not remove the conductive pin during installation; otherwise, electrostatic sparks may easily cause ignition inside the oil-gas barrel. 2. Seal Assembly: When replacing this model, be sure to replace its matching high-temperature and oil-resistant flange graphite gasket at the same time to prevent high-pressure air leakage or oil-gas side leakage.
Maintenance & Replacement
Replacement signal: When the separator differential pressure (ΔP) displayed on the air compressor panel exceeds 0.08 - 0.1 MPa (0.8 - 1.0 bar), or obvious oil carry-over (abnormally increased oil consumption) occurs in the rear pipeline, replacement must be carried out immediately. An expired filter element will not only cause a substantial rise in energy consumption (for every 0.1 bar increase in differential pressure, the motor energy consumption increases by approximately 1%), but also bring risks such as the filter element collapsing or rupturing under pressure.
Before Ordering
Confirm medium, flow rate, pressure, temperature, connection and available installation space.
Delivery Options
Shipping or service point pickup. Our team confirms the best arrangement based on destination, weight and lead time.
Confirmed Before Dispatch
After inquiry, we verify specifications, price and supply status before delivery.
Ongoing Support
For specification, installation or quality questions, keep the product and order information available when contacting us.
INQUIRYSend an inquiry for this product
Send your requirements for B010454350 and our selection team will confirm compatibility, price and lead time.
Frequently Asked Questions
How do I confirm compatibility without a third-party brand reference?
Provide the product number, dimensions, connection details, operating conditions and equipment information. Our team will confirm the application.
Which dimensions should I measure?
Measure the overall height, outer diameter, inner diameter and thread or connection size. A photo or drawing helps confirm the replacement.
How do I choose the correct seal material?
Seal selection depends on the filtration media, operating temperature and chemical compatibility. We can confirm suitable options for your application.
Can you provide a product data sheet?
Yes. Send the product number and required specifications and we will provide the available data sheet and selection support.
