Air Oil Separator 1092994500 

1092994500 is High-performance core maintenance components designed for medium and large industrial mobile air compressors and surface drill rigs.

Core Technical Advantages

• Premium Imported Filter Media:

The internal core filter layer adopts ultra-fine glass fiber from HV (Hollingsworth & Vose) of the US or Binzer of Germany. It is multi-layer composited, wound and folded, featuring high dirt holding capacity and long service life.

• High Cleanliness Output:

The filtration accuracy reaches 0.01 micron. After separation, the residual oil content of compressed air is controlled at ≤ 3 ppm, which effectively protects downstream air-consuming equipment and pipelines.

• Low Energy Consumption Operation:

Initial pressure drop (resistance) ≤ 0.02 MPa (0.2 bar). The low-resistance design can significantly reduce the operating load of the air compressor and cut the overall energy consumption of the unit.

• Robust Explosion-Proof Design:

It adopts an inner and outer double-layer thickened galvanized or stainless steel perforated central skeleton with strong pressure resistance to effectively resist system air flow pulsation. Anti-static conductive gaskets are equipped on the end caps to prevent the risk of internal combustion and explosion caused by static accumulation.

Main Applicable Models and Working Conditions

This product is widely used for heavy-duty mobile power equipment under harsh field conditions in mining, construction engineering sectors:

• Atlas Copco Air Compressors: Matched with medium and low-pressure mobile screw air compressor systems such as the V900 LP.

• Epiroc / Atlas Copco Drilling Rigs: Widely applied to the on-board power systems of high-frequency open-pit down-the-hole drilling rigs including Smartroc D6510LF, D65.